Show simple item record

dc.contributor.authorFree, Scott Thomasen_US
dc.contributor.authorSchor, Andrei L.en_US
dc.contributor.otherMassachusetts Institute of Technology. Energy Laboratory.en_US
dc.date.accessioned2011-08-05T19:55:39Z
dc.date.available2011-08-05T19:55:39Z
dc.date.issued1986en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/65100
dc.description.abstractThis report describes our investigation of steam generator behavior during a postulated tube rupture accident. Our study was performed using the steam generator, thermal-hydraulic analysis code THERMIT-UTSG. The purpose of our work was to provide an independent assessment of the Los Alamos National Laboratory system code TRAC-PF1 with respect to steam generator tube rupture analysis. Results of our work are presented and compared with previous TRAC-PF1 results. There are substantial differences in the results of the two codes. These discrepancies are discussed and deficiencies in both codes are noted. Our results lead us to believe that further investigation and code development are necessary to gain more than a basic understanding of steam generator behavior during such accidents and to provide a simulation capability that is acceptable.en_US
dc.format.extentvi, 89 leavesen_US
dc.publisherCambridge, Mass. : Energy Laboratory, Massachusetts Institute of Technology, 1986en_US
dc.relation.ispartofseriesWorking paper (Massachusetts Institute of Technology. Energy Laboratory) ; MIT-EL 86-006WP.en_US
dc.titleSteam generator tube rupture studyen_US
dc.identifier.oclc25207879en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record